Resetting the Transfer UnitThe print meter keeps a count of the pages processed by the Transfer Unit. As the page count nears the end of life for the transfer unit, a message appears to warn you to replace it soon. After the transfer unit is replaced, reset the transfer unit so that the printer has an accurate […]
Replace the fuser and reset the fuser count on your Xerox Workcentre 6505. WARNING: The Fuser and surrounding area may become hot during operation. To avoid injury, be careful while working in this area. Power the printer off using the power switch located on the right side of the printer, toward the back. Disconnect […]
Replacing the imaging unit (drum cartridge) on the Xerox 6505. Do not expose the Imaging Unit to any light source for more than five minutes. Prolonged exposure to light may damage the unit. Cover the Imaging Unit with a light shield (such as a sheet of paper). Do not touch the shiny blue Transfer […]
Power the printer off using the power switch located on the right side of the printer, toward the back. Wait until the printer has cooled. This will take approximately 40 minutes. Remove Tray 1 and set it aside. Press the button on the top, right side of the printer to open the Front Cover. Lower […]
How to replace the imaging unit chip for biz-hub C200,203,253,353,8650 1 Open the front cover 2 pull pout the imaging unit 3 the chip it local under the imaging, just use small screw drive and replace the chip.
How to replace imaging unit chip for Bizhub C452,C552,C652
How to reset the drum unit for oki C5500n, C5500, C5800, C5800Ldn, C5550n, C5600, C5700, C5800,